On this page
- Start with the box: factory interior dimensions
- Mattress sizes you will design around
- The 12 layouts at a glance
- 1. Fixed rear bed with a garage
- 2. East-west bed with flares (Sprinter and Transit)
- 3. East-west bed without flares (ProMaster)
- 4. Murphy bed
- 5. Convertible dinette
- 6. Lift (elevator) bed
- 7. Family bunks
- 8. Mid-ship wet bath
- 9. Rear dry bath on a long van
- 10. Mobile office
- 11. Adventure garage
- 12. Weekender and race-crew base camp
- Before you commit
- FAQ
A fixed bed and a dinette can both be right, for different vans, heights and trips. This guide starts with the factory inches every plan has to fit inside, then walks through twelve layouts that keep showing up in good builds: a zone-by-zone budget for each, the van it fits, who it suits, and what owners have written about living with it.
The zone budgets are our planning estimates, not factory specs. Measure your own van before you cut anything.
Start with the box: factory interior dimensions
| Van (2026, high roof) | Cargo length at floor | Width between wheel wells | Max width | Max interior height |
|---|---|---|---|---|
| Ram ProMaster 159 WB | 147.1 in | 55.8 in | 75.6 in | 77.6 in |
| Ram ProMaster 159 WB EXT | 161.5 in | 55.8 in | 75.6 in | 77.6 in (86.4 in super high roof) |
| Ford Transit 148 WB high roof | 143.7 in | 54.8 in | 70.2 in | 81.5 in |
| Ford Transit 148 WB extended, high roof | 172.2 in | 54.8 in | 70.2 in | 81.5 in |
| Mercedes Sprinter 2500 144 WB high roof | 133 in | 53 in | 70 in | 79 in |
| Mercedes Sprinter 2500 170 WB high roof | 173 to 174 in | 53 in | 70 in | 79 in |
| Mercedes Sprinter 2500 170 extended | 189 in | 53 in | 70 in | 79 in |
Sources: Ford's 2026 Transit specifications (Ford does not list the maximum width; the 70.2 in figure is from a Transit dimensions guide by a van seller), a Ram dealer's ProMaster dimension tables, and a Mercedes-Benz dealer's Sprinter interior page.
Three things in that table decide most layouts:
- Width decides bed direction. Only the ProMaster is wide enough (75.6 in) to sleep across the van without bodywork, and then only for sleepers up to about 5 ft 10 in once walls are in (our estimate). The Sprinter and Transit need flares for a sideways bed.
- Dual rear wheels change everything. The same Mercedes dealer page lists the 3500, 3500XD and 4500 Sprinters at 39 in between the wheel arches, against 53 in on the 2500. Ford lists 45.4 in for the dual-rear-wheel Transit extended. That narrow gap costs you most of a floor-level garage.
- Height disappears fast. Floor, insulation, ceiling panels and lights usually take a few inches off the factory figure. Plan as if the Transit's 81.5 in becomes about 77 in and the ProMaster's 77.6 in becomes about 73 in (our estimates).
For every interior dimension side by side, see Sprinter vs Transit vs ProMaster for a camper conversion.
Mattress sizes you will design around
Pick the mattress before you draw walls. Nectar's RV size guide lists the RV short queen at 60 x 75 in, the RV queen at 60 x 80 in, the RV full at 53 x 75 in and the RV three-quarter at 48 x 75 in. A 60 x 75 RV short queen mattress is the default for most rear-bed builds: 60 in wide sits on a platform above the wheel wells, and 75 in long fits across a flared van.
The 12 layouts at a glance
| # | Layout | Best van | Bed | Bath | Sleeps |
|---|---|---|---|---|---|
| 1 | Fixed rear bed with garage | Any 144 to 159 in high roof | 60 x 75 lengthwise | Cassette or none | 2 |
| 2 | East-west bed with flares | Sprinter or Transit 144/148 | 60 x 75 sideways | Optional | 2 |
| 3 | East-west, no flares | ProMaster 159 or 159 EXT | about 72 in sideways | Optional | 2 |
| 4 | Murphy bed | 144 to 170 in high roof | Full or queen on wall | Optional | 2 |
| 5 | Convertible dinette | Any, including medium roof | about 64 to 78 in long | Optional | 2 |
| 6 | Lift (elevator) bed | Transit or ProMaster high roof | about 55 x 63 to 77 | Optional | 2 |
| 7 | Family bunks | 170 in or extended | Short queen plus bunks | Usually none | 4 to 5 |
| 8 | Mid-ship wet bath | 159 EXT, 148 EL or 170 | Rear fixed | about 24 x 30 in and up | 2 |
| 9 | Rear dry bath, long van | 170 extended or 148 EL | Front or mid | Separate shower | 2 |
| 10 | Mobile office | 144 to 170 in high roof | Rear fixed or lift | Optional | 1 to 2 |
| 11 | Adventure garage | 144 to 170 in, 4x4 | High rear fixed | Usually none | 2 |
| 12 | Weekender and race-crew base camp | Any, even medium roof | Fold-out or rear | Portable toilet | 2 |
1. Fixed rear bed with a garage
The most common build: a platform across the back, a mattress on top, and a garage underneath reached from the rear doors.
Zone budget for a 159 in ProMaster (147 in floor), planning numbers:
- Bed, running lengthwise: about 76 to 78 in including the frame
- Galley and bench: about 48 in
- Closet and swivel clearance behind the cab seats: about 20 in
The platform height is the big decision. A van seller's bed-height guide suggests 30 to 36 in above the mattress to sit up comfortably and a 3 to 6 in mattress. Work it backward: finished ceiling height, minus sit-up room, mattress and platform, is your garage. In a high roof that finishes around 77 in, a 36 in garage under a 5 in mattress leaves about 35 in to sit up; in a ProMaster finished near 73 in, about 31 in (our estimates). Measure your bike in the position it will ride, wheel on or off, before you pick a number.
Who it suits: full-timers and nightly sleepers. A fixed bed never needs making up, and it gives the most storage per inch of any layout.
What owners report: a full-time couple in a 144 in Sprinter runs this plan: a lengthwise bed because one of them is 6 ft 5 in and could not sleep sideways even with flares, a garage underneath, and a galley and bench up front. They skipped an indoor shower, noting it would have cut their galley in half.
Heavy gear in the garage needs real anchors. Fix L-track tie-down rails to the platform frame or the van's factory tie-down points, not to wall panels. Before drilling the floor, check underneath for the fuel tank, lines and wiring, and follow the van maker's body builder guidance or use a qualified installer.
2. East-west bed with flares (Sprinter and Transit)
Turning the bed sideways (60 in deep instead of 76 to 78 in long) frees about 16 to 18 in of length for a longer galley or a real bench, which is how many people get by with a 144 in Sprinter instead of a 170. The catch is width: the Sprinter and Transit are about 70 in at their widest before walls, so anyone much over about 5 ft 8 in sleeps diagonally without flares (our estimate).
Flares are fiberglass bump-outs that replace the rear side windows. Sandy Vans lists its 170 in Sprinter capsules at $1,799.95 to $3,259.95 depending on options and says they expand interior width to up to 79.5 in. Budget separately for installation, which means cutting into the van body; it is a job for an experienced installer.
Zone budget for a 144 in Sprinter (133 in floor), planning numbers:
- Bed: 60 in deep across the rear, mattress 60 x 75 in sideways
- Galley: 40 to 48 in along one wall
- Seating, fridge or closet: the rest of the floor behind the cab
What owners report: a couple who fitted Flarespace flares to their 144 in Sprinter chose a 60 x 75 in RV queen for the space. They expected the uneven wall depths around the flares to make their custom walls harder to build. A couple who installed their own flares points out the other daily issue: with two sleepers, one person always climbs over the other to get out.
3. East-west bed without flares (ProMaster)
The ProMaster's 75.6 in maximum width is its big advantage. After insulation and walls, expect about 72 in across (our estimate), enough for a sideways bed for sleepers up to about 5 ft 10 in.
Zone budget for a 159 in ProMaster, planning numbers: bed 60 in deep at the rear and a galley of 48 to 60 in leave about 27 to 39 in of the 147.1 in floor for a closet or a swivel-seat zone. That is not enough for a dinette, which needs about 64 in or more. On the 159 EXT (161.5 in floor) you gain another 14 in, enough for a compact wet bath.
Who it suits: couples under about 5 ft 10 in. Measure yourself lying down and add 2 in before you commit.
4. Murphy bed
A bed hinged on one wall folds up flat during the day and down at night. It frees the floor for a desk or lounge, at the cost of daily conversion and a thinner mattress that folds with the frame.
Planning numbers: a folded full or queen frame needs about 12 to 16 in of wall depth when closed and about 75 to 80 in of clear floor when open. Murphy bed hinge and gas strut kits are made for home wall beds, not for a moving vehicle. Check the weight rating, mount into van structure rather than a skin panel, and fit a positive latch so the bed cannot swing down while driving.
What owners report: we found fewer long-term Murphy reports than for any other layout, so we cannot tell you how the hinges and mattress hold up after years. The case for it is strongest for people who use the daytime floor every day, such as a desk or a lounge, and weakest for anyone who just wants to fall into bed.
5. Convertible dinette
Two benches face each other across a table. At night the table drops and the cushions fill the gap. It still works well in medium-roof and shorter vans where a raised platform does not fit.
Planning numbers: two benches about 20 to 24 in deep, with a 24 to 30 in table between them, give a 64 to 78 in bed across or along the van. Seats around 17 to 18 in high and a 28 to 30 in table match household furniture. A Lagun-style swivel table mount lets the table swing out of the way without removing it.
What owners report: the usual complaint is making the bed every night and unmaking it every morning, on cushions with seams in them. Bed guides generally steer part-time campers toward it and nightly sleepers away from it.
6. Lift (elevator) bed
An electric frame raises the made bed toward the ceiling by day and lowers it at night, freeing the space below for seating.
Lonavity's expandable elevator bed, sold from Canada, listed these specs when we checked (confirm them, the currency and stock on the maker's page before you plan around it):
- 63 x 55 in retracted, sliding out to 77 x 55 in
- up to 43.3 in of vertical travel
- 661 lb static rating but only 132 lb dynamic, so nobody rides it up or down
- a 12 V motor on its own 20 A fuse, with a manual backup release
- a listed price of $2,549, shown as sold out at the time
Wire it exactly as the maker's guide says, on its own fuse, or have a qualified installer do it.
Who it suits: people who want a fixed bed's comfort and a dinette's daytime floor, in a tall van like the Transit high roof. One 2026 Sprinter conversion pairs a HappiJac lift bed with two folding sofas to sleep four, but it has only two seat belts.
7. Family bunks
Kids fit in bunks that adults never could. One family build on a 170 in Sprinter has two 24 x 60 in bunks across from the kitchen, a fixed short queen at the rear, two swivel seats and a belted bench for three passengers. One reviewer liked that the ladder is built into the bunks, so nobody trips over it.
Zone budget for a 170 in Sprinter (173 in floor), planning numbers:
- Rear short queen: 60 in deep
- Bunk tower: 24 to 26 in wide, stacked about 30 in apart
- Belted rear bench: 40 to 44 in of floor including legroom
- Galley: whatever remains, about 43 to 49 in
The non-negotiable: a sleeping spot is not a seat. Every passenger needs a crash-tested seat with a proper belt, mounted the way the seat maker specifies. That is a job for a qualified installer. See Van beds compared for how each bed type handles a family.
8. Mid-ship wet bath
A wet bath puts toilet and shower in one sealed box, usually behind the driver or across from the slider. Plan on roughly 24 x 30 in to 30 x 36 in (our planning range). As a ready-made example, the Van Wife 30 in enclosed shower measures 30 in wide, 24 in deep and 74.5 in tall, and it was listed at $2,209.15 on sale in November 2026, without drain, faucet or curtain.
Zone budget for a 159 EXT ProMaster (161.5 in floor), planning numbers: bath 30 in, galley 48 in, rear bed 60 in, and about 23 in left for an aisle and closet. On a 144 in Sprinter the same plan only fits if the bed goes sideways on flares.
What owners report: this is the layout with the most split opinions. A Sprinter owner who built a corner bathroom valued not going outside at night and not advertising that she was traveling alone. She would not build it again: in winter it became an expensive gear closet, the water system had to stay empty in freezing weather, and a shower took about 25 gallons against 10 to 12 for the sink alone. Our van bathroom guide sizes every toilet and shower option.
9. Rear dry bath on a long van
Some builders put a separate toilet room and shower across the very back of a 170 extended Sprinter (189 in floor) or a Transit 148 extended (172.2 in floor), with the bed forward of it or overhead. A separate toilet room and shower need roughly 30 x 48 in or more between them (our estimate), which is why this plan rarely appears in shorter vans.
Who it suits: two people who plan to shower inside often and will drive and park a 22 ft or longer vehicle. Ford lists the Transit extended at 263.9 in overall, and the water for a real shower adds weight fast. Run the payload math in Van build materials and weight before you choose this plan.
10. Mobile office
For remote workers the desk comes first: either a desk behind a swiveled passenger seat or a side desk opposite the slider.
Planning numbers: desk height 28 to 30 in, depth 18 to 24 in, and at least 24 in of knee width. A lift or Murphy bed pairs well with it. A swivel seat base and the same Lagun table mount can turn the cab seat into a desk chair.
Who it suits: solo travelers and couples where one person works.
11. Adventure garage
The fixed rear bed pushed to its limit: a tall garage for bikes or boards, often with a slide-out tray. The trade-off is headroom: every inch of garage comes out of sit-up room, even in a high roof.
Planning numbers for a 144 in high-roof Sprinter, our estimates: garage 38 to 42 in tall by 60 in deep and a 5 to 6 in mattress. If the 79 in factory height finishes near 75 in, that leaves only about 26 to 31 in to sit up. A heavy-duty locking drawer slide tray makes the far end of the garage usable. Rate it well above the load, bolt it to the platform frame, and make sure it locks closed for driving.
Who it suits: mountain bikers, skiers and climbers who sleep in the van to get to the trailhead. Measure your own van's finished height before you set the platform.
12. Weekender and race-crew base camp
Not every van needs to be a house. A weekender keeps it light: a simple rear platform or fold-out bed, a 12 V fridge, a portable toilet and lots of open floor. It suits medium-roof vans and keeps cost and weight down.
The race-crew version is the one we think about most in Arizona. A crew van at an ultra is a rolling aid station: a flat place to lie down, shade, ice and fast gear access from the side door.
Planning numbers, our estimates:
- Rear platform about 24 in high, so a runner can sit on the edge without climbing
- 36 to 48 in of open floor at the slider for a chair and gear bins
- A small galley block of about 24 to 30 in with a fridge
A portable toilet and a 12 V compressor fridge cover most needs. A pop-up canopy handles shade at the crew point. The full race-crew build, with recovery gear and cold plunge ideas, is in The ultra runner and race-crew van build.
Before you commit
Draw the plan at full scale with painter's tape on a garage floor and spend an evening inside the outline. Your knees and elbows will catch problems a drawing misses.
FAQ
What is the best camper van layout for two people full-time?
For most couples it is a fixed rear bed with a garage, plus a galley and a two-seat bench or swivel seats. If you are both under about 5 ft 10 in, a sideways bed in a ProMaster or a flared Sprinter or Transit frees more living space.
Can a 6 ft person sleep sideways in a van?
It is tight. A ProMaster's 75.6 in factory width leaves about 72 in after walls (our estimate), which fits a 6 ft sleeper with no room to spare. In a Sprinter or Transit, which are about 70 in at their widest, a 6 ft person needs flares or a diagonal bed.
Is a wet bath worth the space?
It depends on how often you would shower inside. An indoor toilet is the part owners tend to value, for night use and privacy. The shower is the part that costs the most water, space and winter hassle, and the owner reports we read describe using it less than planned. A cassette toilet with an outdoor shower is the common compromise.
What garage height do I need for bikes?
Measure your own bike in the position it will travel, wheel on or off, and add a couple of inches. Then check what is left: a van seller's guide suggests 30 to 36 in above the mattress to sit up, and every inch of garage comes out of that.
How many seat belts does a family van need?
One crash-tested seat and belt for every person who rides, installed to the seat maker's instructions by a qualified installer. Bunks and sofa beds do not count as seats.
Some links are Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.