On this page
- Start with the van: who can sleep east-west
- Flares: buying the width back
- The five bed types, side by side
- Fixed platform: the default for good reasons
- Murphy and hideaway beds
- Electric and winch lift beds
- Convertible dinettes and other two-in-one beds
- Bunks for families
- Mattresses that work in a van
- Ventilation under the mattress
- Which bed fits which build
- FAQ
The bed is the biggest single object in a camper van. A 60 x 75 in mattress covers about 31 square feet, close to half the cargo floor of a 144 in Sprinter. The galley, the garage and whether a bathroom fits at all are all decided around it, so choose the bed type early, with a tape measure, before you buy cabinets or cut a window.
This guide compares the five common answers: a fixed platform, a Murphy (fold-up) bed, a lift bed, a convertible dinette, and a sideways bed made possible by flares. It also covers family bunks, mattresses and ventilation. Prices are 2026 retail listings linked to where we found them, or are marked as our estimates. Listings change, so check before you order.
Start with the van: who can sleep east-west
Sleeping across the van (east-west) instead of lengthwise saves about 15 in of floor length, and in a short van that can be the difference between a real galley and a cramped one. Whether it works depends on the van's inside width and on how tall you are.
| Van (2026, high roof) | Max inside width | Width between wheel wells | Max interior height | East-west without flares? |
|---|---|---|---|---|
| Ram ProMaster 136 / 159 | 75.6 in | 55.8 in | 77.6 in (86.4 in super high) | Yes, for most people about 6 ft and under |
| Ford Transit 148 high roof | 70.2 in | 54.8 in | 81.5 in | Only for shorter sleepers |
| Mercedes Sprinter 144 / 170 high roof | 70 in | 53 in | 79 in | Only for shorter sleepers |
Sources: Ford's 2026 Transit specifications, a Ram dealer's ProMaster tables, a Mercedes-Benz dealer's Sprinter page, and a van seller's Transit guide for the Transit width, which Ford does not list.
Those are bare-metal numbers; insulation and wall panels take roughly 1.5 to 2 in per side (our estimate). A Sprinter conversion guide puts a finished Sprinter at about 67 in across at shoulder height, and Bearfoot Theory's bed guide uses about 5 ft 10 in as the working width after paneling. A finished ProMaster usually lands around 72 in (our estimate from the 75.6 in factory figure).
The rule of thumb that falls out of this: your height plus 2 to 3 in of pillow and toe room has to fit inside the finished width. That makes a sideways bed comfortable for most sleepers up to about 6 ft in a ProMaster, but only up to roughly 5 ft 4 in to 5 ft 7 in in a Sprinter or Transit without bodywork. One owner on a European van forum hit the classic trap: the bed fit on paper only if they ignored the insulation (Van Living Forum thread). Measure where the mattress will actually sit, because the body curves inward above the window line.
Two more points. The van is narrowest between the wheel wells (53 to 55.8 in), so a sideways bed has to sit above them. And with two people across the van, whoever sleeps against the wall climbs over the other at 3 a.m. Many couples call that a fair trade; some find out they hate it. For every interior dimension side by side, see Sprinter vs Transit vs ProMaster.
Flares: buying the width back
Flares are fiberglass bump-outs that replace the rear side windows or panels and push the wall out at bed height, the standard fix for a sideways bed in a Sprinter or Transit.
- Flarespace full flares for a 144 in Sprinter: $1,799 to $2,327. Nomadic Supply says they are made to order, with about 5 to 6 weeks of production.
- Sandy Vans capsules for the 170 in Sprinter: $1,799.95 to $3,259.95, claiming up to 79.5 in of interior width.
- Campervan HQ's Flarespace listing quotes roughly 74 to 79 in of sleeping width, depending on the driver-side option.
A Sportsmobile forum member put the practical gain at about 6 in of total width. Treat any vendor's maximum as a best case.
Installation is extra: cutting the body, bonding, sealing and often paint. Rates vary too much to quote, so get a written estimate from an installer who has done your model. Flares also make wall framing harder around their stepped edges.
The five bed types, side by side
| Bed type | Typical sleep size | What it costs you | 2026 price range | Best for |
|---|---|---|---|---|
| Fixed rear platform | 60 x 75 in lengthwise, or sideways in a ProMaster / flared van | 60 to 75 in of floor, permanently | About $400 in lumber DIY (guide); $5,975 to $5,995 for commercial systems (Radius, Flatline) | Couples, adventure gear, full-timers |
| Murphy (fold-up) | Full or queen, about 60 x 75 to 80 in | 12 to 16 in of wall depth when folded (planning estimate) | $5,315 to $9,995 for kits | Remote work, small vans, people who want a living room |
| Electric or winch lift | Queen across the rear | 10 to 15 in of ceiling when lowered | About $500 hardware to $2,999 kits; DIY winch about CA$800 to 1,000 | Garage plus bed in a high roof van |
| Convertible dinette | About 48 to 54 x 72 to 75 in | Nightly setup, softer cushions | Our estimate: $300 to $1,500 for a table mount, cushions and frame | Medium roof vans, short trips, extra guests |
| Sideways with flares | 60 x 75 in across | Body work, harder walls, climbing over | $1,799 to $3,260 for the parts, plus install | 144 in Sprinters and Transits |
Commercial prices are sourced in the sections below; the dinette range is our estimate.
Fixed platform: the default for good reasons
A fixed rear bed is the simplest, cheapest and most common answer. Nothing to set up, nothing to motorize, and the space underneath becomes the garage. The key decision is height, and Vansmith's bed-height guide gives a simple formula:
Platform height = lowest ceiling height − headroom above the mattress − mattress thickness − deck and framing thickness.
Its working ranges: 30 to 36 in of headroom to sit up (24 to 30 in if you mostly lie down), a 3 to 6 in mattress, and 1.5 to 3 in of deck and framing. On a Sprinter high roof with about 79 in of bare ceiling: 79 − 33 − 4 − 2 puts the platform top near 40 in, leaving roughly 38 in of garage before your ceiling panel takes its share.
The same builder puts most of its layouts at 20 to 26 in platforms, and says a full-suspension mountain bike usually needs about 36 to 40 in with the front wheel on (Vansmith cargo van bed guide). One ProMaster owner on the Class B forum reported handlebars just clearing a bed raised to 32 in (Class B Forum thread). Measure your tallest bike, cooler or bin, then mock up the bed with 2x4s or boxes and sit up on the mattress before you build.
Construction notes:
- Vansmith lists rough load ratings of 400 to 600 lb for DIY plywood and 600 to 1,000+ lb for aluminum extrusion, with a 25 to 30 percent buffer over the heaviest expected load. Two adults sitting down hard load it more than two lying still.
- Tie the frame into the factory floor tracks or ribs, not wall skin. In a sudden stop the bed is crash mass.
- 80/20 style aluminum extrusion lets you move the deck height later, at a higher price than plywood. Our materials and payload guide has the weight math.
- L-track along the garage walls gives you tie-down points for bikes and bins.
Murphy and hideaway beds
A Murphy bed folds up against a side wall or the rear doors during the day, leaving open floor for a bench, desk or yoga mat. Commercial systems listed in 2026:
- Flatline Van Co. Sprinter Murphy bed: $9,995. Flatline lists a 60 x 79.4 in sleeping platform with flares. A Canadian reseller lists the same bed at about 66 to 69 in long without flares, and fitment as 2007 and later high roof Sprinters.
- Rigwell Nomad Murphy bed and storage system: listed at $6,400 at one retailer and $6,845 (marked down from $7,275) at another. High roof Sprinter, ProMaster and Transit only.
- Serg Supply Murphy bed system: $5,315, shown as sold out when we checked.
DIY Murphy beds usually borrow hardware from home wall beds: Murphy bed gas spring hardware kits or simple hinges with gas struts sized to the weight of the frame plus mattress. Home kits are rated for a stud wall in a building that never moves, so mount into the van's structure and add a positive latch in both positions. Gas struts also lose force in the cold and gain it in the heat, so a strut that feels right in a Phoenix July can feel weak on a January night in Flagstaff. Follow the hardware maker's rating.
The trade-offs: you make and unmake the bed daily, bedding has to stay thin enough to fold, and the floor under it has to stay clear. In exchange, a 144 in van gets a real daytime lounge.
Electric and winch lift beds
A lift bed (or elevator bed) rides up toward the ceiling by day and drops to sleeping height at night. In a high roof van that gives you a tall bike garage when it is up and a sit-up bed when it is down. Kits and hardware listed in 2026:
| Product | Listed price | Weight | Rated load | Notes |
|---|---|---|---|---|
| RoamlabX / Tec Vanlife expandable elevator bed | $2,999 (another retailer lists $2,459) | 66 lb (30 kg) | Not confirmed | Electric motor with a manual backup release |
| Lippert Smart Bed electric lift (UK) | £1,499.99 | 23 kg boxed | 250 kg static | UK listing |
| MOBORV 12V / 24V aluminum bed lift | $495 to $575 | 33 kg gross | 400 kg static, 80 kg moving | Import listing; check documentation carefully |
| Happijac (Lippert) bed lift | Quote only | Varies | Varies | Sold through dealers after you send measurements (forum report); one review put a reseller near $2,000 |
Read the rated load carefully. A static rating is what the bed holds while it is parked on its stops. The moving rating is what the motor will lift, and on the MOBORV listing that figure is only 80 kg, about 176 lb. That is enough to lift a frame and mattress, not you lying on it. Unless the manual says otherwise, raise and lower a lift bed empty, then let it rest on its stops or supports before anyone climbs in.
The DIY winch version
A well-documented DIY build on a Sprinter 170 used a 3,500 lb ATV winch, synthetic rope and ceiling pulleys to lift a queen bed on an 80/20 frame (Drink Tea Travel build guide). The authors report:
- CA$692 in parts in 2017, and a 2026 budget of CA$800 to 1,000.
- About 450 to 500 lb with two adults aboard, with rope and winch sized for at least three times that.
- About 10 to 15 in of headroom lost when lowered, so the van needs at least 6 ft inside.
- Three years of daily use without a rope or pulley failure, though vibration loosened frame bolts. They advise thread-locker, regular checks, a backup strap when raised, and resting the bed on supports for sleeping.
If you go with 12V linear actuators instead, actuator sellers suggest sizing force at about 1.5 times the moving weight (Firgelli's bed-lift guide), and they note the guides and rails, not the actuators, carry the side loads. Unsynchronized actuators can rack the frame. This is a structural and electrical project: follow the maker's wiring diagram and fuse rating, and use a qualified installer if you are unsure.
Other downsides: the ceiling must carry tracks or pulleys, so plan them before the panels go up, and the bed has to be locked for driving.
Convertible dinettes and other two-in-one beds
A dinette bed is two facing benches with a table between them. At night the table drops to bench height and the back cushions fill the gap. It is the classic answer for medium roof vans, weekend trips and a guest bed.
Typical sizes are about 48 to 54 in wide by 72 to 75 in long (planning numbers from our layouts guide): roomy for one adult, a full-size bed for two. A removable table leg kit lets the top become a bed board, and a Lagun-style table mount lets the same table serve a swivel cab seat. Our estimate for the dinette-bed parts in 2026, excluding the benches: about $300 to $1,500, mostly depending on custom upholstery.
The usual complaints are nightly setup, seams down the middle and soft foam that sags. For nightly use, choose firmer foam than you would for seating, or add a 3 in memory foam topper. Rock-and-roll benches and slide-out platforms make the same trade. Any bench that carries passengers while driving needs crash-tested seats and belts.
Bunks for families
Bunks are how families of four and five make one van work. Vansmith's family builds page says most of its family vans sleep four or five with a mix of dinette beds, overhead bunks and fold-down beds, and calls the Sprinter 170 high roof its most popular family platform.
Sizes are small. One family build on a 170 in Sprinter used 24 x 60 in bunks beside a rear short queen (Tiny House Talk tour). The Wayward Home's bunk roundup warns that the top bunk sits right under the ceiling, where heat collects, which matters in Arizona. Put a vent fan near it.
- Plan about 60 in of length for young kids and closer to 72 in for teens (our planning numbers).
- Add a rail or bunk safety net on any raised bunk.
- Bunks are for parked use only. Every child rides in a proper belted seat or car seat.
- Count four people and their gear in the payload math.
Mattresses that work in a van
Most van beds use foam, not springs. It is lighter, it cuts to odd shapes, and it does not rattle. Common sizes, from Nectar's RV mattress size guide:
- RV short queen: 60 x 75 in. The default for rear beds, and long enough to go sideways in a flared or ProMaster van.
- Standard queen: 60 x 80 in. Usually only fits lengthwise.
- RV full: 53 or 54 x 75 in.
Thickness: Vansmith's guide lists 3 to 4 in as its standard and 5 to 6 in for full-timers who prioritize sleep. Every inch of mattress comes out of your headroom or garage, so decide it alongside the platform height. A short queen RV mattress suits most fixed beds; for Murphy and lift beds, thinner, lighter foam keeps the moving weight down. Odd shapes for flares or dinettes can be cut at home or ordered from a foam shop.
Ventilation under the mattress
Many people discover this problem in their first cold month. A sleeper gives off moisture all night, and when warm, damp air meets a cold platform under foam, it condenses. Foam on solid plywood can grow mildew. Ways builders handle it:
- A spacer mat. HyperVent-style condensation underlay keeps an air gap under the mattress. One marine retailer sells it by the linear foot, 39 in wide, from $14.17, and one RV owner reported $142 with shipping for a short queen. One retailer says its version cannot be cut, so ask first.
- Slats or a drilled deck instead of solid plywood let air move, and save weight.
- Insulate the wall behind the mattress, never bare metal. Our insulation guide explains why vapor control matters around beds.
- Air the mattress now and then after cold, humid nights, and run a roof fan with a window cracked overnight.
Arizona's dry air helps most of the year, but high-country winter nights and monsoon humidity still bring condensation.
Which bed fits which build
- Full-timers with bikes or gear: fixed rear platform at a measured garage height.
- Couple in a 144 in Sprinter or Transit wanting living space: sideways bed on flares.
- ProMaster, both sleepers under about 6 ft: sideways bed, no bodywork.
- Remote worker in a short van: Murphy bed over a desk or bench.
- High roof van, tall garage only some days: lift bed with a checked load rating.
- Medium roof or weekends: convertible dinette.
- Family of four or five: long van, rear bed plus bunks, enough belted seats.
The bed is one line in the budget; our 2026 van conversion cost guide shows the rest.
FAQ
What is the cheapest van bed that still works every night?
A fixed plywood platform. One guide puts the lumber at about $400, versus $2,000 or more for a comparable pre-built bed (guide).
Can a 6 ft person sleep sideways in a Sprinter?
Usually not comfortably without flares. A finished Sprinter is about 67 in across at shoulder height, so a 72 in sleeper plus a pillow will not fit straight. Flares bring it into the mid to high 70s, or you sleep lengthwise.
How high should a van bed be?
Work backward from your ceiling: subtract 30 to 36 in of sit-up headroom, your mattress and 1.5 to 3 in of deck. In most high roof vans that leaves a garage of somewhere in the 20s to the high 30s of inches. Mock it up before you build.
Are electric lift beds safe?
They can be when installed to the maker's instructions, but the moving rating is often far below the static rating. Follow the manufacturer's manual, secure the bed for driving, and use a qualified installer if the structure or wiring is beyond you.
Murphy bed or lift bed?
A Murphy bed gives you open floor and a lounge during the day. A lift bed gives you a tall garage under it and leaves the walls free. If you carry bikes, the lift bed usually wins; if you work from the van, the Murphy bed usually does.
What mattress size should I buy for a van?
An RV short queen (60 x 75 in) fits most rear beds and most sideways layouts. Buy the mattress after you have measured the finished space, not before.
Some links are Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.